WELDING CIRCULAR FEED RATE CALCULATION

Wire Diameter

, mm.

Wire Feed Rate

, m/min.

Welding Height (A)

, mm.

Workpiece Diameter (D)

, mm.

DURATION

TURN RATE

Welding circular feed rate calculation tips:

Enter the values according to the units in the sections on the right. If there is a decimal, write it in the fields after the comma.
Write only numbers in the fields. (Do not even write periods or commas.)
Especially in welding robots and welding automation equipment, the robot speed that must be entered is created by calculating the approximate weld cross-section area.
In MIG/MAG fillet welding, stable results can be achieved at A3, A4, A5, A6 welding heights with the correct welding parameters.